AABearings

  Self-lubricating metal bearings produced by metallurgic powder ​ Maintenance-free bearings with homogeneously distributed solid lubricant (graphite, MoS2) in the metallic matrix High load capacity and temperature ranges up to 600°C possible depending on the alloy Corrosion resistant alloys are available Lead free alloys are available

  Steel bushings ideally suited for lubricated applications With plain or grooved sliding layer Suitable for grease lubrication Low rotation speed with high specific pressure

  Maintenance-free bearing for general engineering applications Superior performance compared to GGB-FP20 METAFRAM under high loads and low speeds Produced by powder metallurgy process and therefore suitable for complex shapes Similar to SINT A 10, impregnation group 1​ Maintenance-free bearing for general engineering applications Optimum performance under relatively light loads and high speeds Produced by powder metallurgy process and therefore suitable for complex shapes CYLINDRICAL BEARINGS FLANGED BEARINGS CYLINDRICAL BLANKS SOLID ROD BLANKS SPHERICAL BEARINGS AFNOR DIN 30910 BRONZE GGB-BP25 FU-E10-62 Sint A50 IRON ALLOY GGB-FP20  FC10-U3-56 Sint A10 IRON ALLOY GGB-SO16 F50-U20-60

 

  Bearing material made of solid bronze strip with indents for lubrication Good wear resistance, suitable for rough conditions Optimum performance under relatively high loads and low speeds

 

  Bimetal bearing with steel backing and leaded bronze overlay For lubricated applications with plain sliding layer Suitable for oil and grease lubrication PART NO. PM2015SY  PM2025SY  PM2030SY PM2215SY PM2220SY  PM2225SY  PM2230SY PM2515SY PM2520SY  PM2525SY  PM2530SY PM2815SY PM2820SY  PM2825SY  PM2830SY PM3015SY  PM3020SY  PM3025SY  PM3030SY PM3040SY PM3230SY PM3240SY PM3515SY  PM3520SY  PM3525SY  PM3530SY  PM3535SY  PM3540SY  PM3545SY  PM3550SY PM4020SY  PM4030SY  PM4040SY  PM4050SY PM4060SY PM4530SY PM4540SY  PM4550SY PM4560SY PM5020SY  PM5030SY  PM5040SY PM5050SY PM5060SY PM5535SY  PM5540SY  PM5555SY PM5560SY PM6030SY PM6040SY  PM6060SY PM6070SY PM6540SY  PM6550SY PM6560SY PM6570SY PM7030SY  PM7040SY  PM7045SY  PM7050SY  PM7065SY PM7080SY PM7540SY  PM7560SY PM7580SY PM8040SY PM8060SY  PM8075SY PM8080SY PM8560...

  DU self-lubricating split bushings offer very good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions Bushing material suitable for lubricated applications Anti-friction bearing suitable for linear, oscillating and rotating movements Approved to standard FAR 25.853 and FAR 25.855 (Federal Aviation Regulations) and ASTM E162:2016 – surface flammability testing for aircraft interior applications Tested acc. to ASTM E595/ECSS-Q-ST-70-02C - Outgassing properties of materials used in Spacecraft equipment Approved to standard DIN EN 1797 and ISO 21010 (Cryogenic Vessels – Gas/Material Compatibility) for piping, valves, fittings and other components in both gaseous and liquid oxygen for up to maximum temperature of 60°C and oxygen pressure of 25 bars. Cylindrical bushes / split bushings Flanged bushes / flanged split bushings Thrust washers Flanged washers Sliding plates 02DU02 025DU025 04DU04 05DU06 06DU03 07DU08 09DU06 10DU0...

  Excellent low friction and wear resistance performance in lubricated applications Excellent flow erosion and cavitation resistance Very good fatigue strength Lead-free material compliant to ELV, WEEE, and RoHS specifications