AABearings

  Maintenance-free bearing material for heavy duty applications Excellent performance under high loads and intermittent operation Also available with graphite inserts for temperatures above 250°C GGB-DB-B: Standard material fulfills most application requirements GGB-DB-C: High load capacity with maximum corrosion resistance GGB-DB-D: Highest load capacity, but less corrosion resistance than GGB-DB-C with graphite inserts: GGB-DB-B-11 ǀ GGB-DB-C-11 ǀ GGB-DB-D-11 with PTFE inserts:  GGB-DB-B-16 ǀ GGB-DB-C-16 ǀ GGB-DB-D-16

  Self-lubricating metal bearings produced by metallurgic powder ​ Maintenance-free bearings with homogeneously distributed solid lubricant (graphite, MoS2) in the metallic matrix High load capacity and temperature ranges up to 600°C possible depending on the alloy Corrosion resistant alloys are available Lead free alloys are available

  Steel bushings ideally suited for lubricated applications With plain or grooved sliding layer Suitable for grease lubrication Low rotation speed with high specific pressure

  Maintenance-free bearing for general engineering applications Superior performance compared to GGB-FP20 METAFRAM under high loads and low speeds Produced by powder metallurgy process and therefore suitable for complex shapes Similar to SINT A 10, impregnation group 1​ Maintenance-free bearing for general engineering applications Optimum performance under relatively light loads and high speeds Produced by powder metallurgy process and therefore suitable for complex shapes CYLINDRICAL BEARINGS FLANGED BEARINGS CYLINDRICAL BLANKS SOLID ROD BLANKS SPHERICAL BEARINGS AFNOR DIN 30910 BRONZE GGB-BP25 FU-E10-62 Sint A50 IRON ALLOY GGB-FP20  FC10-U3-56 Sint A10 IRON ALLOY GGB-SO16 F50-U20-60

 

  Bearing material made of solid bronze strip with indents for lubrication Good wear resistance, suitable for rough conditions Optimum performance under relatively high loads and low speeds

 

  Bimetal bearing with steel backing and leaded bronze overlay For lubricated applications with plain sliding layer Suitable for oil and grease lubrication PART NO. PM2015SY  PM2025SY  PM2030SY PM2215SY PM2220SY  PM2225SY  PM2230SY PM2515SY PM2520SY  PM2525SY  PM2530SY PM2815SY PM2820SY  PM2825SY  PM2830SY PM3015SY  PM3020SY  PM3025SY  PM3030SY PM3040SY PM3230SY PM3240SY PM3515SY  PM3520SY  PM3525SY  PM3530SY  PM3535SY  PM3540SY  PM3545SY  PM3550SY PM4020SY  PM4030SY  PM4040SY  PM4050SY PM4060SY PM4530SY PM4540SY  PM4550SY PM4560SY PM5020SY  PM5030SY  PM5040SY PM5050SY PM5060SY PM5535SY  PM5540SY  PM5555SY PM5560SY PM6030SY PM6040SY  PM6060SY PM6070SY PM6540SY  PM6550SY PM6560SY PM6570SY PM7030SY  PM7040SY  PM7045SY  PM7050SY  PM7065SY PM7080SY PM7540SY  PM7560SY PM7580SY PM8040SY PM8060SY  PM8075SY PM8080SY PM8560...

  DU self-lubricating split bushings offer very good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions Bushing material suitable for lubricated applications Anti-friction bearing suitable for linear, oscillating and rotating movements Approved to standard FAR 25.853 and FAR 25.855 (Federal Aviation Regulations) and ASTM E162:2016 – surface flammability testing for aircraft interior applications Tested acc. to ASTM E595/ECSS-Q-ST-70-02C - Outgassing properties of materials used in Spacecraft equipment Approved to standard DIN EN 1797 and ISO 21010 (Cryogenic Vessels – Gas/Material Compatibility) for piping, valves, fittings and other components in both gaseous and liquid oxygen for up to maximum temperature of 60°C and oxygen pressure of 25 bars. Cylindrical bushes / split bushings Flanged bushes / flanged split bushings Thrust washers Flanged washers Sliding plates 02DU02 025DU025 04DU04 05DU06 06DU03 07DU08 09DU06 10DU0...

  Excellent low friction and wear resistance performance in lubricated applications Excellent flow erosion and cavitation resistance Very good fatigue strength Lead-free material compliant to ELV, WEEE, and RoHS specifications

  Good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions Very good performance in lubricated applications particularly in marginally lubricated applications Suitable for linear, oscillating and rotating movements Lead-free material compliant to ELV, WEEE, and RoHS specifications Cylindrical bushes Flanged bushes Sliding plates Thrust washers PART NO. DP4® DP4-B DP10 0203DP4 0203DP4B 0203DP10 0205DP4 0205DP4B 0205DP10 0303DP4 0303DP10 0305DP4 0305DP10 0306DP4 0306DP4B 0306DP10 0403DP4 0403DP10 0404DP4 0404DP4B 0404DP10 0406DP4 0406DP4B 0406DP10 0410DP4 0410DP4B 0410DP10 0505DP4 0505DP4B 0505DP10 0508DP4 0508DP10 0510DP4 0510DP4B 0510DP10 0604DP4 0604DP10 0606DP4 0606DP4B 0606DP10 0608DP4 0608DP10 0610DP4 0610DP4B 0610DP10 0705DP4 0705DP10 0710DP4 0710DP10 0806DP4 0806DP10 0808DP4 0808DP4B 0808DP10 0810DP4 0810DP4B 0810DP10 0812DP4 0812D...

  Die slides are mainly based on copper alloys and are bearings with a solid lubricant (plug) embedded in them. We have a wide range of standard products in sizes. It has excellent wear resistance properties under no lubrication and boundary lubrication. It has a high load capacity. PART NO TA1003 TA1203 TA1203N TA1303 TA1403 TA1503 TA1603 TA1603N TA1803 TA2005 TA2505 TA3005 TA3505 TA4007 TA4507 TA5008 TA5508 TA6008 TA6508 TA7010 TA7510 TA8010 TA9010 TA10010 TA12010

  It is a non-lubricated bearing for heavy loads based on copper alloy and embedded with plugs manufactured with carefully selected solid lubricants. It is maintenance-free and does not require refueling. It has extremely good wear resistance characteristics. It exhibits excellent wear resistance characteristics in areas where oil film formation is difficult, such as reciprocating, intermittent and oscillating motions under high load and low speed motion conditions. Low coefficient of friction. It can be used in a wide range from low to high temperatures. It has excellent corrosion resistance and chemical resistance. It has excellent impact resistance. PART NO SAFG0610 SAFG0612 SAFG0812 SAFG0815 SAFG1012 SAFG1015 SAFG1020 SAFG1212 SAFG1215 SAFG1220 SAFG1225 SAFG1312 SAFG1315 SAFG1320 SAFG1325 SAFG1512 SAFG1515 SAFG1520 SAFG1525 SAFG1612 SAFG1615 SAFG1620 SAFG1625 SAFG1814 SAFG1820 SAFG1825 SAFG2014 SAFG2020 SAFG2025 SAFG2514 SAFG2520 SAFG2525 SAFG3020 SAFG3025 SAFG3035 SAFG3520 SAF...

  Die slides are mainly based on copper alloys and are bearings with a solid lubricant (plug) embedded in them. We have a wide range of standard products in sizes. It has excellent wear resistance properties under no lubrication and boundary lubrication. It has a high load capacity. PART NO PA1875 PA18100 PA18125 PA18150 PA2875 PA28100 PA28125 PA28150 PA35100 PA35150 PA35200 PA35250 PA35300 PA35350 PA3875 PA38100 PA38125 PA38150 PA4875 PA48100 PA48125 PA48150 PA50100 PA50150 PA50200 PA50250 PA50300 PA50400 PA75150 PA75200 PA75250 PA75300 PA75400 PA75500

  It is an environmentally friendly lead-free material that does not require lubricants at all. Copper-tin alloy is sintered porously on steel backing metal, lined with polyacetal resin (POM) and lipophilic fibers and oils with special fillers. It combines the good sliding properties of oil-impregnated POM materials with the strength and dimensional stability of metal materials. It has a low coefficient of friction and wear resistance properties under no lubrication. It can be used at high speed and without lubrication. It has a high load capacity. It has an excellent tolerance for misalignment. Low coefficient of friction does not cause stick slip. It has a wide operating temperature range. PART NO DBB10W DBB14W DBB16W DBB18W DBB20W DBB22W DBB24W DBB25W DBB30W DBB35W DBB45W DBB50W DBB12W DBB40W

  It is a completely oil-free bearing that does not require any lubricant, and is made of a copper-tin alloy sintered porously into a steel backing metal, and lined with a mixture of ethylene tetrafluoride resin (PTFE) and a special filler. It combines the good sliding properties of PTFE + special filler with the strength and dimensional stability of metal materials. It has a low coefficient of friction and wear resistance properties under no lubrication. Low coefficient of friction does not cause stick slip. It has a high load capacity. It has a wide operating temperature range. It has excellent chemical resistance. PART NO K5P100 K5P150 K5P200 K5P250 K5P300

  It is an environmentally friendly lead-free material that does not require lubricants at all. It is a material composed of polyacetal resin (POM), lipophilic fibers, special fillers and oils, which can be injection molded to create complex shapes and have good sliding properties due to oil-impregnated POM materials. It has a low coefficient of friction and wear resistance properties under no lubrication. It can be used at high speed and without lubrication. Low coefficient of friction does not cause stick slip. Complex shapes are possible through injection molding. It has an excellent tolerance for misalignment. It has a wide operating temperature range. PART NO DBS0303 DBS0305 DBS0404 DBS0406 DBS0505 DBS0508 DBS0510 DBS0605 DBS0606 DBS0608 DBS0610 DBS0806 DBS0808 DBS0810 DBS0812 DBS0815 DBS1008 DBS1010 DBS1012 DBS1015 DBS1210 DBS1212 DBS1215 DBS1220 DBS1410 DBS1415 DBS1420 DBS1510 DBS1515 DBS1520 DBS1615 DBS1620 DBS1625 DBS1815 DBS1820 DBS1825 DBS2010 DBS2015 DBS2020 DBS2025 DBS...

  Non-lubricated bearings for heavy loads based on copper alloy and embedded plugs manufactured with selected solid lubricants. Maintenance-free and no need for refueling. It has excellent wear resistance properties. It exhibits excellent wear resistance in areas where oil film formation is difficult, such as reciprocating, intermittent and oscillating motions under high load and low speed motion conditions. Low coefficient of friction. It can be used in a wide range from low to high temperatures. It has excellent corrosion resistance and chemical resistance. It has excellent impact resistance. PART NO SAF0810 SAF0815 SAF1010 SAF1012 SAF1015 SAF1017 SAF1020 SAF1210 SAF1215 SAF1220 SAF1225 SAF1230 SAF1315 SAF1320 SAF1415 SAF1420 SAF1425 SAF1510 SAF1515 SAF1520 SAF1525 SAF1530 SAF1615 SAF1618 SAF1620 SAF1623 SAF1625 SAF1630 SAF1635 SAF1640 SAF1820 SAF1830 SAF2015 SAF2020 SAF2025 SAF2030 SAF2035 SAF2040 SAF2515 SAF2520 SAF2525 SAF2530 SAF2535 SAF2540 SAF2550 SAF3020 SAF3025 SAF3030 SA...

  It is a metal-based oil-free bearing in which a solid lubricant (graphite) is finely and uniformly dispersed in a bronze-based metal. Type D is a general grade of thermalloy that can be used in a wide range of service conditions. It has a low coefficient of friction and wear resistance properties under no lubrication. Bearings are resistant to the ingress of foreign objects. It has excellent corrosion resistance. It has a wide operating temperature range. It has excellent electrical conductivity. PART NO DM101610 DM101615 DM101620 DM121810 DM121815 DM121816 DM121820 DM121825 DM121830 DM131915 DM131920 DM142015 DM142020 DM152115 DM152120 DM152125 DM162215 DM162216 DM162220 DM162225 DM162230 DM162235 DM182420 DM182425 DM182430 DM202815 DM202816 DM202820 DM202825 DM202830 DM202835 DM202840 DM203020 DM203025 DM203030 DM203035 DM203040 DM223020 DM223025 DM223030 DM253316 DM253320 DM253325 DM253330 DM253335 DM253340 DM253520 DM253525 DM253530 DM253535 DM253540 DM283820 DM283830 DM30382...

  Non-lubricated bearings for heavy loads based on copper alloy and embedded plugs manufactured with selected solid lubricants. Maintenance-free and no need for refueling. It has excellent wear resistance properties. It exhibits excellent wear resistance in areas where oil film formation is difficult, such as reciprocating, intermittent and oscillating motions under high load and low speed motion conditions. Low coefficient of friction. It can be used in a wide range from low to high temperatures. It has excellent corrosion resistance and chemical resistance. It has excellent impact resistance. Material (Base)High-strength brassLength Tolerance (mm)-0.1/-0.3 PART NO HA081208 HA081210 HA081212 HA081215 HA101408 HA101410 HA101412 HA101415 HA101420 HA121808 HA121810 HA121812 HA121815 HA121816 HA121819 HA121820 HA121825 HA121830 HA131910 HA131912 HA131915 HA131920 HA142010 HA142012 HA142015 HA142020 HA142025 HA142030 HA152110 HA152112 HA152115 HA152116 HA152120 HA152125 HA152130 HA1622...

  Environmentally friendly Pb-free bearings that do not use lead at all. The bearing surface has an extremely small coefficient of static friction as well as a dynamic friction coefficient, so it slides smoothly without lubrication. Allowable surface pressure (MPa) Highest: 137 Common: 49.0 or less Allowable sliding speed (m/min) Highest: 60 Common: Under 15 Linear expansion coefficient (×10-6/°C) Direction Parallel to Bearing Surface: 11 Thickness Direction: 30 UsesGeneral industrial equipment, hydraulic equipment, household electrical appliances, automobile parts, textile machinery, packaging machineryMaterialEthylene fluoride resin (PTFE) + special additivesOperating temperature range (°C)-200～280Pressure Resistance (MPa)Compressed: 304Thermal conductivity (W/mk)42Coefficient of Friction (μ)0.03～0.2 PART NO K5F0303-7 K5F0305-7 K5F0404-9 K5F0406-9 K5F0504-10 K5F0505-10 K5F0506-10 K5F0605-12 K5F0606-12 K5F0607-12 K5F0608-12 K5F0610-12 K5F0705-13 K5F0707-13 K5F0710-13 K5F0712-13 K5...

  Daido Metal Thrust Washers, Multi-layer DAIDYNE Thrust Washer DDK05 Series provides reliable performance by reducing friction and wear in rotating machinery. Designed to support axial loads, these thrust washers optimize operation and extend equipment lifespan in high-stress environments. With durable construction, these thrust washers effectively absorb shocks and vibrations, protecting sensitive systems without compromising performance. Ideal for various industrial applications, they ensure smooth operation and enhanced reliability in demanding conditions. PART NO K5T06 K5T08 K5T10 K5T12 K5T14 K5T16 K5T18 K5T20 K5T22 K5T24 K5T25 K5T30 K5T35 K5T40 K5T45 K5T50

  Pre-lubricated bearings are made of environmentally friendly lead-free materials and use grease and other lubricants during assembly. It is a bearing material with high load capacity that can be expected to have a long service life due to regular lubrication. Copper-tin alloy is sintered porously on a steel backing metal and lined with polyacetal resin (POM) + α. It combines the good sliding properties of the indentation (grease pocket) with the strength and dimensional stability of the metal material. It has high speed and high load capabilities. It has high durability due to its ability to hold lubricant. It has low friction coefficient and wear resistance properties under pre-lubrication. It has a wide operating temperature range. It has an excellent tolerance for misalignment. PART NO DXT10 DXT12 DXT16 DXT18 DXT20 DXT22 DXT24 DXT25 DXT30 DXT35 DXT40 DXT45 DXT50

  It is an environmentally friendly lead-free material that does not require lubricants at all. Copper-tin alloy is sintered porously on steel backing metal, lined with polyacetal resin (POM) and lipophilic fibers and oils with special fillers. It combines the good sliding properties of oil-impregnated POM materials with the strength and dimensional stability of metal materials. It has a low coefficient of friction and wear resistance properties under no lubrication. It can be used at high speed and without lubrication. It has a high load capacity. It has an excellent tolerance for misalignment. Low coefficient of friction does not cause stick slip. It has a wide operating temperature range. PART NO DBB0504 DBB0505 DBB0506 DBB0508 DBB0605 DBB0606 DBB0607 DBB0608 DBB0610 DBB0705 DBB0707 DBB0710 DBB0712 DBB0806 DBB0808 DBB0810 DBB0812 DBB1006 DBB1008 DBB1010 DBB1012 DBB1015 DBB1020 DBB1206 DBB1208 DBB1210 DBB1212 DBB1215 DBB1220 DBB1410 DBB1412 DBB1415 DBB1420 DBB1510 DBB1512 DBB1515...