GGB-SHB - Metal and Bimetal - Case Hardened Steel Bearings

 


Steel bushings ideally suited for lubricated applications

With plain or grooved sliding layer

Suitable for grease lubrication

Low rotation speed with high specific pressure



Popular posts from this blog

GGB - DU & DX Metal-Polymer - Maintenance-Free Bearing Solutions

  DU self-lubricating split bushings offer very good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions Bushing material suitable for lubricated applications Anti-friction bearing suitable for linear, oscillating and rotating movements Approved to standard FAR 25.853 and FAR 25.855 (Federal Aviation Regulations) and ASTM E162:2016 – surface flammability testing for aircraft interior applications Tested acc. to ASTM E595/ECSS-Q-ST-70-02C - Outgassing properties of materials used in Spacecraft equipment Approved to standard DIN EN 1797 and ISO 21010 (Cryogenic Vessels – Gas/Material Compatibility) for piping, valves, fittings and other components in both gaseous and liquid oxygen for up to maximum temperature of 60°C and oxygen pressure of 25 bars. Cylindrical bushes / split bushings Flanged bushes / flanged split bushings Thrust washers Flanged washers Sliding plates 02DU02 025DU025 04DU04 05DU06 06DU03 07DU08 09DU06 10DU0...
Read more

Sleeve Bearings & Parts

GGB BEARINGS GM2024-016 GM2024-016 GAR-MAXAA PLAIN BEARING ; 1-1/4"ID 1-1/2"OD 1"LTB Sleeve Bearing; 1-1/4" Nominal Bore; 1-1/2" Nominal Outside Diameter; 1" Length Thru Bore; Bushing No Flange Profile; Composite of Wound PTFE and High Strength Fiber Encapsulated by Epoxy Resin; GAR-MAX Material Part # GM2024-016 363012 $ 37.00 / each 10 1 GGB BEARINGS 1420DU 1420DU DU PLAIN BEARING Sleeve Bearing; 14MM Nominal Bore; 16MM Nominal Outside Diameter; 20MM Length Thru Bore; Bushing No Flange Split Profile; Steel Backing | Bronze Inner Structure | PTFE Lead Overlay; DU Material Part # 1420DU 361470 $ 8.75 / each 15 1 GGB BEARINGS 12FDU16 12FDU16 DU FLANGED BUSHING Sleeve Bearing; 3/4" Nominal Bore; 7/8" Nominal Outside Diameter; 1" Length Thru Bore; Bushing With Flange Split Profile; Steel Backing | Bronze Inner Structure | PTFE Lead Overlay; Steel Backed Composite Material; 1-1/4" Flange Outside Diameter; 0.059" Flange Thickness Part #...
Read more